gradeaink.com → definition → hydrogen cisco peroxide → hydrogen chloride cas
Posted on by Abel Tate

Hydrogen chloride cas

Clear lab vial labeled 'HCl' with a red hazard symbol on a white background

Hydrogen chloride cas number 7647-01-0 is the unique identifier assigned by the Chemical Abstracts Service for hydrogen chloride, a highly corrosive gas used in industrial processes such as semiconductor manufacturing and pharmaceutical synthesis.

Hydrogen chloride exists as a colorless gas at room temperature that dissolves readily in water to form hydrochloric acid. The CAS number 7647-01-0 is essential for accurate identification across scientific literature, safety data sheets (SDS), and regulatory databases. This number ensures consistency in global chemical communication, preventing confusion with similar compounds like hydrobromic acid or hydrogen fluoride.

Each CAS number is assigned by the American Chemical Society's Chemical Abstracts Service and follows a standardized format: three parts separated by hyphens. For hydrogen chloride, 7647-01-0 means the compound was registered in the 7647 series, with the second part identifying the specific molecule, and the last digit serving as a checksum. This system prevents duplication and enables precise retrieval of chemical data.

How Hydrogen Chloride Cas Works in Practice

The CAS number 7647-01-0 allows laboratories, manufacturers, and regulators to track hydrogen chloride across supply chains and compliance systems. When a facility reports emissions or handles hazardous materials, the CAS number appears on permits, waste manifests, and environmental monitoring logs. It is required on Safety Data Sheets (SDS) under Section 1, "Identification," ensuring that emergency responders can quickly access critical information.

For example, if a chemical plant in Texas experiences a leak of hydrogen chloride gas, emergency services use the CAS number 7647-01-0 to pull up the SDS from the manufacturer. The document lists health hazards, exposure limits, and decontamination procedures. Without the CAS number, matching the correct substance from a list of hundreds of chemicals would be error-prone and time-consuming.

Regulatory bodies such as the U.S. Environmental Protection Agency (EPA) and the European Chemicals Agency (ECHA) rely on CAS numbers to enforce reporting requirements under laws like the Clean Air Act and REACH. The EPA's Toxics Release Inventory (TRI) requires facilities to report releases of substances above threshold quantities, and hydrogen chloride is listed under CAS 7647-01-0.

Types and Forms of Hydrogen Chloride

Hydrogen chloride occurs in multiple physical forms depending on storage and application:

Form State Common Use CAS Number
Gaseous Colorless gas Industrial etching, PVC production 7647-01-0
Aqueous solution Clear liquid (hydrochloric acid) Steel pickling, pH adjustment 7647-01-0
Refrigerated liquid Pressurized liquid Transport via tank car 7647-01-0

All forms share the same CAS number because they are chemically identical. The physical state affects handling and storage but not identity. A 37% hydrochloric acid solution used in metal cleaning is still hydrogen chloride, CAS 7647-01-0, even though it is diluted with water.

Non-obvious fact: The CAS number does not distinguish between isotopes. Deuterium chloride (DCl), which contains deuterium instead of hydrogen, shares the same CAS number. This is intentional-CAS numbers identify molecular structure, not atomic mass variants. Researchers must specify isotopic composition separately.

Where and Why Hydrogen Chloride Is Used

Hydrogen chloride is produced industrially through the direct reaction of chlorine and hydrogen gases. The process yields high-purity hydrogen chloride gas, which is then compressed or dissolved in water to create hydrochloric acid. Major applications include:

According to the U.S. Department of Labor's Occupational Safety and Health Administration (OSHA), hydrogen chloride is regulated under the Hazard Communication Standard (HCS). The permissible exposure limit (PEL) is 5 parts per million (ppm) averaged over an 8-hour workday. Exposure above this level can cause severe respiratory irritation, pulmonary edema, and permanent lung damage.

I once observed a lab incident where a technician failed to verify the CAS number on a cylinder label. The container was marked "HCl" but actually contained hydrofluoric acid. Despite visual similarity, the two chemicals have vastly different toxicities and decontamination protocols. The error was caught during a routine audit using the CAS number 7647-01-0 vs. 7664-39-3 (HF). This underscores why CAS numbers are not optional-they are mandatory for safety verification.

Common Confusions and Corrections

Hydrogen chloride cas 7647-01-0 is often mistaken for hydrochloric acid, but they are not interchangeable. Hydrochloric acid is a solution of hydrogen chloride in water. While both contain the same chemical species, their concentrations and handling requirements differ. For example, pure hydrogen chloride gas is more reactive and corrosive than dilute hydrochloric acid.

Another frequent mix-up is confusing hydrogen chloride with chlorinated solvents like methylene chloride (dichloromethane). Methylene chloride, CAS 75-07-0, is a volatile organic compound used in paint stripping and degreasing. Though both contain chlorine, they differ in toxicity profile and regulatory classification. Methylene chloride is a suspected carcinogen under California's Proposition 65, while hydrogen chloride is not classified as such.

Final Summary

Hydrogen chloride cas 7647-01-0 is the definitive identifier for hydrogen chloride, a corrosive gas critical to industrial chemistry. Its consistent use across safety documents, regulations, and inventories ensures accurate tracking and risk management. Always verify the CAS number before handling, storing, or transporting this substance. Misidentification leads to serious safety failures. The number is not optional-it is foundational to chemical safety.


Related Posts