A cat6 female to female cable is a shielded Ethernet patch cable with identical female RJ45 connectors on both ends, designed to link two network devices directly-such as switches, routers, or servers-without requiring a wall jack or adapter.
Unlike standard cat6 cables that have one male and one female end, this version uses two female connectors. This configuration allows it to connect two devices that each have male RJ45 ports, such as connecting two network switches or linking a server to a switch.
These cables support speeds up to 10 Gbps over distances up to 55 meters, meet the TIA/EIA-568-B.2-1 standard for cat6 performance, and are suitable for structured cabling in offices, data centers, and home networks.
The cat6 female to female cable functions by providing a continuous electrical path between two devices through twisted-pair conductors inside the cable. Each of the eight wires in the cat6 specification is color-coded and arranged in a specific pattern-T568B being the most common-to minimize crosstalk and ensure signal integrity.
When plugged into two devices, the female connectors grip the male pins on each device's RJ45 port. The internal contacts align with the corresponding pins on the plug, completing the circuit. Data travels across pairs 2 and 3 (for transmission and reception) at frequencies up to 250 MHz, which supports high-speed networking.
Because both ends are female, the cable cannot be plugged directly into a wall outlet or patch panel unless adapters are used. This makes it unsuitable for permanent installations but ideal for temporary or direct connections between equipment.
While all cat6 female to female cables share the same basic design, differences exist in shielding, jacket material, and connector quality. These affect performance and durability in different environments.
| Type | Shielding | Use Case | Example Application |
|---|---|---|---|
| Unshielded (UTP) | None | Low-interference indoor settings | Connecting two switches in a quiet office |
| FTP (Foiled Twisted Pair) | Foil wrap around each pair | Medium interference zones | Server room with moderate EMI |
| S/FTP (Screened Foiled Twisted Pair) | Foil + braided shield | High-noise environments | Data center with heavy electrical equipment |
Most cat6 female to female cables use S/FTP shielding for maximum noise rejection. The outer jacket is typically PVC or LSZH (low-smoke zero-halogen) for fire safety in enclosed spaces.
These cables are primarily used in scenarios requiring direct device-to-device connectivity. Common setups include:
In my experience during a small-scale network upgrade at a co-working space, we used a cat6 female to female cable to connect two managed switches. The setup bypassed the need for a wall jack and reduced latency compared to routing through a central switch. The connection held stable at 1 Gbps over 3 meters with no packet loss.
They're also useful in troubleshooting. If a device fails to connect via a wall port, plugging a cat6 female to female cable directly between the device and a known-working switch can isolate whether the issue lies in the wall jack or the device itself.
Many users mistake cat6 female to female cables for adapters or extension cables. They are not adapters-they do not convert male to female or vice versa. A female-to-female cable does not allow you to plug a male-ended device into a female port; it requires two male ports on the connected devices.
Another misconception is that these cables can replace wall jacks. They cannot. Wall jacks are designed for permanent installation and are wired to a patch panel. Using a female-to-female cable in place of a wall jack creates a weak point in the network infrastructure and violates structured cabling standards.
Also, unlike male-to-female patch cables, which are often called "straight-through" cables, cat6 female to female cables are not standardized under the TIA-568 naming system because they are not intended for use in structured cabling. They are considered auxiliary or crossover tools.
Understanding the difference between female and male connectors is essential. The female connector has the receptacle-the hole that accepts the male pin. The male connector has the protruding pins that insert into the female socket.
Standard cat6 patch cables have one male and one female end. A female-to-female cable reverses this: both ends are female. This means the cable cannot be plugged into a wall plate or patch panel without an adapter.
For clarity, see female and male connector types and their roles in network cabling.
cat6 female to female cables are rated for 10 Gbps speeds but only over short distances-up to 55 meters. Beyond that, signal degradation increases due to attenuation and crosstalk. For longer runs, cat6a or fiber optic cabling is recommended.
These cables are not suitable for outdoor use unless specifically rated for it. Standard cat6 cables degrade quickly when exposed to UV light, moisture, or temperature extremes. Always check the jacket rating (e.g., "UV-resistant," "indoor/outdoor") before installing outside.
One non-obvious fact: even though both ends are female, the internal wire mapping still follows the T568B standard. This ensures compatibility with other cat6 devices. Miswiring can occur if the cable is hand-assembled incorrectly, leading to intermittent connectivity.
Consider a small business with two network switches: Switch A (with 8 ports) and Switch B (also 8 ports). To combine them into a single network segment, the IT team plugs a cat6 female to female cable into port 8 of Switch A and port 8 of Switch B. Both switches are configured with the same VLAN and IP subnet. Traffic flows directly between them at 1 Gbps.
Without this cable, the team would need to run a separate cable from each switch to a central patch panel or use a patch panel with female jacks-an extra layer of complexity. The female-to-female cable simplifies the setup and reduces hardware costs.